Hot Sale Silicone Structural Glazing Sealant for Building and Industrial

• Type: Silicone Sealant
• Seal Tape Kind: Liquid Tape
• State: Fluid
• Specification: 100% active
• Origin: China
• HS Code: 3824999

Product Description

LIMITATIONS

 BM two component silicone sealant should not be applied:

 
     1.Glass, stone, marble, granite, aluminum curtain wall and glass daylighting roof and metal structural engineering structural adhesive seal;

     2.Insulating Glass of the second seal

     3.Many other building and industrial applications


SAFETY INFORMATION 

 

     1.BM two component silicone sealant is a chemical product, not edible, no implantation into body and should be kept away from children.

     2.Cured silicone rubber can be handled without any risk to health.

     3.Should uncured silicone sealant contact with eyes, rinse thoroughly with water and seek medical treatment if irritation persists.

     4.Avoid prolonged exposure of skin to uncured silicone sealant.

     5.Good ventilation is necessary for work and cure places.

Application Method
   Mask areas adjacent to joints to ensure neat sealant lines. Apply BM two component silicone sealant in a continuous operation using dispensing guns. Before a skin forms, tool the sealant with light pressure to spread the sealant against the joint surfaces. Remove masking tape as soon as the bead is tooled.


TYPICAL PROPERTIES
  These values are not intended for use in preparing specifications.

Test project	Unit	value
Flow, sagging or vertical flow	mm	0
Operating time	min	20
surface drying time(25ºC,50%R.H.)	min	40-60
Durometer Hardness	Shore A	20-60
At 23 ºC maximum tensile strength elongation	%	≥100
Tensile strength(23ºC)	Mpa	0.9
Tensile strength(90ºC)	Mpa	0.68
Tensile strength(-30ºC)	Mpa	0.68
Tensile strength(flooding)	Mpa	0.68
Tensile strength(flooding - ultraviolet)	Mpa	0.68
Bond damage area	%	5
Thermal aging(thermal weight loss)	%	≤5
Thermal aging(crack)		No
Thermal aging(efflorescence)		No